64
VTX A12 | Rigging Manual
14.2 STORAGE CONFIGURATION
The two angle selection plates can be removed from their regular positions and secured horizontally for storage using the M20 knobs.
Use the (S) marks on the angle plate labels for proper alignment.
14.3 ANGLE SELECTION PLATES
The Base Plate angle selection plates include nine pin positions, allowing for a range of angles from -15 degrees to +5 degrees in 2.5-de-
gree steps. Line Array Calculator 3 software determines the most appropriate position to select to obtain the required down angle, and
checks array safety.
5.0°
2.5°
0°
-2.5°
-5.0°
-7.5°
-10°
-12.5°
-15°
VTX A12 BP
S
S
-15°5°
To Next Page
Loading...
Need help?
General
