26
VTX A12 | Rigging Manual
8 - VTX A12 AF ARRAY FRAME AND EB EXTENSION BAR
The VTX A12 AF is a lightweight Array Frame used for suspending VTX A12 enclosures. The frame was designed to operate in sin-
gle-point, front-to-back, or side-by-side suspension modes using the VTX A12 AF EB Extension Bar. One Extension Bar is included with
the frame and a second Extension Bar can be added to facilitate side-by-side suspension.
8.1 ARRAY FRAME OVERVIEW
FRONT EXTENSION BAR
ATTACHMENT POINT
ARRAY FRAME HANDLE
VTX A12 CONNECTION
POINT
EXTENSION BAR
STORAGE POSITION
LASER BEAM EXIT HOLE
TIP: One VTX A12 AF Extension Bar is always required when using the VTX A12 AF.
EXTENSION BAR
CONNECTION TABS
VTX A12 CONNECTION
POINT
To Next Page
Loading...
