35
VTX A12 | Rigging Manual
8.9 EXTENSION BAR USE CASES
The VTX A12 Array Frame can be deployed in a number of configurations with one or two VTX A12 Extension Bars. It is important to note
that only certain configurations are correct and safe for suspension of VTX A12 arrays. The images below illustrate proper configura-
tions for attaching VTX A12 Extension Bars, and where suspension points should be attached to the Extension Bars. Suspension points
should never be connected horizontally across two extension bars.
SINGLE POINT DUAL POINTS
SIDE-BY-SIDE
DUAL POINTS
FRONT-TO-BACK
DUAL POINTS USING BRIDALS
FRONT-TO-BACK
FOUR POINTS
CAUTION: When multiple suspension points are used, always make sure all suspension points are evenly or
properly loaded.
To Next Page
Loading...
Need help?
General
