J
John WebsterSep 13, 2025
What to do if JDS Uniphase Industrial Equipment PDL shows only noise?
- DDavid LopezSep 13, 2025
Take another reference and acquire a new trace.
To Next PageTo Next PageWhat to do if JDS Uniphase Industrial Equipment PDL shows only noise?
Take another reference and acquire a new trace.
What does 'TPS Error' mean on JDS Uniphase Industrial Equipment?
To ensure that the polarization state is detected properly: Stop the software and press STOP on the SOM. When the laser stops scanning, press DISPLAY. In the display that appears on the SOM, record the value of the parameter Points. In the SWS15100.INI file in the C:\WINDOWS directory, ensure that the MaxPoints parameter is the same as the value of Points read from the SOM. If there is a data collection problem, inspect the ribbon connection to the I/O card on the back of the computer. If possible, replace the ribbon cable and run the program again. Clean all optical connections, particularly the ones on the receiver control module, and try again.
General| Brand | JDS Uniphase |
|---|---|
| Model | SWS15100 |
| Category | Industrial Equipment |
| Language | English |
Glossary of technical terms used in the manual, explaining key concepts and terminology.
Critical guidelines and precautions for safe operation, servicing, and repair of the equipment.
Information regarding CE and FDA-CDRH compliance standards applicable to the equipment.
Overview of the Swept Wavelength System (SWS), its applications, and system components.
Detailed technical and optical performance specifications for the SWS and its modules.
Procedures for checking equipment condition and completeness upon receipt.
Recommended conditions for temperature, humidity, and ventilation for optimal system performance.
Guide to configuring operational parameters for the Source Optics Module (SOM).
Procedures for establishing system defaults and compensating for optical path losses before measurements.
Detailed descriptions of functions within the SWS DLLs for software development.
Guidance on diagnosing and resolving common problems and faults encountered with the SWS.
List of error messages from software and hardware components with resolution steps.