MULTIMEDIA 259
9. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting “Yes” will make this phone
the highest priority. This phone will take
precedence over other paired phones within
range and will connect to the Uconnect
system automatically when entering the
vehicle. Only one mobile phone and/or one
Bluetooth® audio device can be connected
to the Uconnect system at a time. If “No” is
selected, simply select “Uconnect” from the
mobile phone/audio device Bluetooth®
screen, and the Uconnect system will
reconnect to the Bluetooth® device.
NOTE:
For phones which are not made a favorite, the
p
h
one priority is determined by the order in
which it was paired. The most recent phone
paired will have the higher priority.
NOTE:
During the pairing procedure, you may receive a
p
o
p-up on your mobile phone for the Uconnect
system to access your “messages” and
“contacts”. Selecting “Ok” or “Allow” will sync
your contacts with the Uconnect system.
You can also use the following VR command to
br
ing up the Paired Phone screen from any
screen on the radio:
“Show Paired Phones”
NOTE:
Software updates on your phone or the
Uc
onnect system may interfere with the
Bluetooth® connection. If this happens, simply
repeat the pairing process. However, first make
sure to delete the device from the list of phones
on your Uconnect system. Next, be sure to
remove Uconnect from the list of devices in your
phone’s Bluetooth® settings.
Pair A Bluetooth® Streaming Audio Device
For information on how to pair a Bluetooth®
st
reaming audio device with the Uconnect 3
With 5-inch Display radio
Ú page 257.
1. Press the Media button on the
t
ouchscreen to begin.
2. Change the source to “Bluetooth®”.
3
. Press the Bluetooth® button on the
t
ouchscreen to display the Paired Audio
Devices screen.
4. Press the Add Device button on the
t
ouchscreen.
NOTE:
If there is no device currently connected with
t
h
e system, a pop-up will appear.
5. Search for available devices on your
B
luetooth®-enabled audio device. When
prompted on the device, confirm the PIN
shown on the Uconnect screen.
6. Uconnect Phone will display an in-process
s
creen while the system is connecting.
7. When the pairing process has successfully
c
ompleted, the system will prompt you to
choose whether or not this is your favorite
device. Selecting “Yes” will make this device
the highest priority. This device will take
precedence over other paired devices
within range.
NOTE:
For devices which are not made a favorite, the
de
vice priority is determined by the order in
which it was paired. The most recent device
paired will have the higher priority.
5
To Next Page
Loading...
