GETTING TO KNOW YOUR VEHICLE 67
Placement of the Wireless Speaker
Then push/rotate forward on the front of the
sp
eaker until the speaker locks in place.
Rotating the Wireless Speaker
Charging External Devices
The Jeep® wireless speaker is capable of
charging most USB-enabled smartphones and
tablets using the type A USB charging port.
To use the external charging feature:
1. T
urn the speaker on.
2
. Plug the USB power cable into the type A
U
SB charging port on the back of the
speaker.
3. Insert the other end of the USB power cable
i
nto your device to immediately begin
charging.
Charging The Speaker
Before using the Jeep® wireless speaker for the
first time, fully charge your Jeep® wireless
speaker until the battery indicator light stays
solid green.
The Jeep® wireless speaker in-vehicle dock is
th
e most ideal way to fully charge the speaker
with the ignition in ON/RUN or ACC. The speaker
can also be charged with a power adapter.
NOTE:
Jeep® wireless speaker will not charge within
ve
hicle dock while the ignition is fully off.
To charge the Jeep® wireless speaker with a
po
wer adapter, insert the power adapter into a
wall outlet. Next, plug the power adapter into
the Jeep® wireless speaker charging port on
the back of the speaker.
NOTE:
Power adapter needed for the Jeep® wireless
s
p
eaker has to have a range of 14 VDC to
16.5 VDC, with a minimum of 2.7A and a barrel
c
o
nnector dimension of 5.5 mm by 2.5 mm.
Po
wer adapter is not included.
Monitoring Battery Level Status LED Light
Red 40% or lower
Yellow 40% to 70%
Green 70% to 100%
2
To Next Page
Loading...
