68 GETTING TO KNOW YOUR VEHICLE
Operating Temperature
The Jeep® wireless speaker contains a
lithium-ion rechargeable battery. Typical
charging temperatures for these types of
batteries are from 0 to 45°C (32 to 113°F).
NOTE:
The functions described are for when the Jeep®
wi
reless speaker is undocked from the vehicle.
When plugged into the docking station, the
Jeep® wireless speaker functions as part of the
vehicle’s sound system.
Phone & Bluetooth® Pairing
A feature of the Jeep® wireless speaker is the
ability for the Jeep® wireless speaker to
connect to devices using Bluetooth®. Follow
these simple steps to connect a
Bluetooth®-enabled device to the Jeep®
wireless speaker:
1. Press and hold the power button for
2
-3 seconds to turn the Jeep® wireless
sp
eaker on.
2. Turn “on” Bluetooth® for the device you
d
esire to be connected to the Jeep®
wireless speaker. For instructions on how to
turn on and off Bluetooth® settings for the
desired device, refer to the device’s user
manual.
3. When powered on, the Jeep® wireless
s
peaker will automatically enter pairing
mode. To pair a second device, press and
hold the Bluetooth® button for 2-3 seconds,
until an audio cue is heard. Then go to the
devices’ Bluetooth® settings and select
“Jeep® Speaker” from the list.
The Jeep® wireless speaker will remember the
la
st eight devices it has paired with.
NOTE:
If the Jeep® wireless speaker is left on with an
i
n
active Bluetooth® connection for 30 minutes,
it
will automatically turn off. The Jeep® wireless
speaker can be turned on again by pressing and
holding the power button for 2-3 seconds.
Temperature
<-4°F
(<
-20°C)
-4 to 32°F
(< -20 to 0°C)
32 to 113°F
(0 to 45°C)
115 to 140°F
(4 6 to 60°C)
>140°F
(> 60°C)
Speaker state (docked or Direct Current
[D
C] plugged in)
Off On On On Off
Speaker state (undocked and running off
ba
ttery)
Off On On On Off
Speaker’s Internal Battery Charging No No Yes No No
To Next Page
Loading...
