86 GETTING TO KNOW YOUR VEHICLE
If the rear window and quarter panel cover
assemblies were previously removed, proceed
as follows to install:
1. Guide the top of the quarter panel cover
a
ssembly up into the retainer.
Step One
2. E
ngage the plastic retainers on the front of
t
he cover assembly (toward the front of the
vehicle) starting at the top, and working
downward.
Step Two
NOTE:
It is critical that the retainers are fully engaged
be
fore the vehicle resumes motion.
3. Secure the hook-and-loop fastener at the
u
pper front corner of each quarter panel
cover assembly by pressing firmly.
Step Three
4. From either side, guide the rear window into
t
he retainer while keeping the window level.
Step Four
CAUTION!
Failure to follow all quarter panel cover
assembly and rear window install steps could
result in damage to the Soft Top or vehicle.
To Next Page
Loading...
