What to do if I cannot insert a disc into Jensen VM9213 Car Receiver?
If you cannot insert a disc into your Jensen Car Receiver, it is possible that there is already a disc inside the unit. Eject the current disc and then insert the new one.
Why won't my Jensen VM9213 Car Receiver play the disc?
If a disc does not play back on your Jensen Car Receiver, there are several potential reasons. The disc might be warped or scratched, so use a disc in good condition. It could also be dirty or wet, so clean it with a soft cloth. The laser pickup might be dirty, so clean it with a cleaning disc. Ensure that a compatible disc is used and that the disc rating does not exceed the Parental Lock rating limit; if it does, change the Parental Lock settings to lower the restriction. Also, make sure the disc region code is compatible with the unit, and that the disc is inserted with the label side up.
Why is there no repeat function on my Jensen VM9213 Car Receiver?
If there is no repeat or searching function available while playing a VCD on your Jensen Car Receiver, it is likely because PBC is turned on. Turn PBC off to enable these functions.
What causes interruption during playback on Jensen Car Receiver?
If an interruption occurs during playback on your Jensen Car Receiver, it could be due to a dirty or scratched disc. Try cleaning the disc or replacing it. It may also be caused by a damaged file or bad recording; in this case, recreate the disc with good files.
Details on optional modules like navigation and Bluetooth, and rear cameras.
Explains the functions of various buttons on the unit's front panel.
Details about the disc slot and the USB interface connector for media playback.
Lists and explains the functions of buttons on the remote control for different modes.
Covers screen adjustments, aspect ratio, parking brake inhibit, and monitor movement.
Explains powering on/off, mute, source selection, and volume adjustment.
Instructions on how to reset the unit to factory default settings.
Guides on accessing and modifying setup options like clock, tuner, language, and audio.
Details on Bluetooth pairing, rating, camera input, and TFT auto-open settings.
Explains the tuner display, band selection, seek tuning, and manual tuning.
Details on storing, recalling, and auto-storing radio stations.
Covers playback controls like play, pause, stop, fast forward, rewind, and repeat functions.
Explains menu access, chapter navigation, direct entry, angle selection, and multi-language options.
Outlines media compatibility, file naming, and basic playback controls for MP3/WMA files.
Details random playback, intro scan, direct track entry, and photo viewing.
Guides on pairing a phone, managing incoming/outgoing calls, and call transfer.
Covers managing incoming/outgoing calls, and call transfer.
Details accessing phone book, missed/dialed/received calls.
Explains A2DP audio streaming and switching between phone and music interfaces.
Addresses power, remote, audio, sound quality, and TFT monitor problems.
Covers problems with disc playback and interpreting error messages.
Details warranty terms, exclusions, and limitations on liability.
Lists the included accessories and components with the VM9213 unit.
Lists the necessary tools and supplies for installing the VM9213.
Outlines steps before installation, including disconnecting the battery and preparing the mounting sleeve.
Illustrates wiring connections and advises on fuse replacement.
General| Touchscreen | Yes |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| Radio Tuner | AM/FM |
| Rear Camera Input | Yes |
| DVD Player | Yes |
| SD Card Slot | Yes |
| Navigation | No |
| AUX Input | Yes |
| Backup Camera Input | Yes |
| Remote Control | Yes |
| Display Size | 6.2 inches |
| Audio Formats Supported | MP3/WMA |
| Display Resolution | 800 x 480 |
To Next Page
