Warning！
If inverter damage caused by the following circumstances will be beyond the warranty
scope.
● Ensure DC max. short-circuit current being in inverter allowable range when
configure PV arrays, otherwise, may cause non-recoverable damage.
● When the photovoltaic array is configured, it is necessary to ensure that the
open-circuit voltage of each photovoltaic group string does not exceed the
maximum DC input voltage of the inverter. The maximum DC input voltage of the
JNPXL series photovoltaic water pump inverter is shown in the technical
parameters of each type of inverter in the appendix.
Warning！
●
It would affect the inverter performance and may cause inverter damage if the
installation environment is improperly.
● Don’t install the inverter in inflammable, explosive place or inflammable, explosive
materials storage place.
● Don’t install the inverter in place where is vulnerable to lightning strike.
●
Don’t install the inverter in place where have heavy salt fog.
●
When running the inverter, please ensure good ventilation.
● Inverter should be installed erectly, and ensure the heat sink, fans are without shelter.
To Next Page
Loading...
