12
Notice！
●
All electrical installation must comply with local and national electrical installation
standards
● In order to ensure safe running, proper grounding, using appropriate conductor size
and providing short circuit protection are required.
● Connection cable must select suitable specification, firm connection and good
insulation.
Running
Danger！
● When the AC side of the inverter is running with AC load, the DC connection cannot
be directly disconnected. Firstly, make sure that the inverter is shut down and there is
no AC output. Make sure there is no voltage between the AC input side and the DC
input side, then the AC and DC input side can be disconnected.
●
Please don’t plug any connector when inverter is charged with power.
●
Please don’t open the cover plate when inverter is charged with power.
Notice
！
Only LCD display screen and DC switches can be touched when the inverter is running,
the heating devices (such as radiator, etc.) should not be touched to avoid scald.
To Next Page
Loading...
