Johnson Controls AD-1272 User Manual

AD-1272 Advanced Thermal Dispersion Probe Airflow Measuring System Technical Bulletin
42
13. Press UP or DOWN to scroll to the Enable Sensors submenu selection. Press ENTER.
14. Scroll to display the correct probe number on line 2 and press ENTER.
15. Press UP or DOWN to display the sensor numbers that are enabled by selecting this option and press ENTER.
16. Press ESC. The display returns to the Sensor Management submenu.
17. Scroll to the Disable Sensors submenu selection and press ENTER.
18. Follow Steps 14 and 15 to disable the sensors.
19. Press UP or DOWN to scroll to the Display Probe Status submenu selection.
Figure 74: Enable Sensors Selection Screen
Figure 75: Probe Selection Display Screen
Figure 76: Probe Selection Display Screen
Figure 77: Disable Sensors Selection Screen
Figure 78: Disable Probe Status Selection Screen

Johnson Controls AD-1272 Specifications

General

Brand	Johnson Controls
Model	AD-1272
Category	Measuring Instruments
Language	English