QUANTUM™ HD COMPRESSOR CONTROL PANEL
MAINTENANCE
090.040-M (MAR 12)
Page 107
POINT-TO-POINT FIELD WIRING DIAGRAM
(Refer to Frick publication 090.400-SB for installation guidelines)
GND T1 T2 T3 GND T1 T2 T3 GND 20 19 18 8 5 4 3 2 1
MOTOR
COMP
MOTOR
FOR EXACT WIRING CONFIGURATION
FRICK SUPPLIED COMBINATION
STARTER PACKAGE
Quantum™ HD
FRICK QUANTUM™ HD ENCLOSURE
1. REFER TO MOTOR NAMEPLATE
FOR CORRECT MOTOR
CONNECTION.
2. SEPARATE CONDUIT RUNS FOR
CONTROL VOLTAGE WIRING
AND MOTOR CONNECTION
WIRING.
3. CONDUIT GROUNDS ARE NOT
ACCEPTABLE.
4. ALL WIRING MUST BE PER
LATEST EDITION OF THE NEC
AND LOCAL CODES.
5. ALL CONTROL VOLTAGE WIRING
HI-LEVEL CUTOUT
AND/OR OTHER FIELD
SAFETY CUTOUTS AS
3PHASELINE
GND
5
25
This drawing appears here for reference purposes only, and is subject to change without notice. When installing, or servicing equipment,
always refer to the actual drawings that are included with the control panel for the latest information.
To Next Page
Loading...
