Johnson Controls T9100 - Fan and Sensor Settings; Fan Off Delay Configuration; Remote Sensor Configuration

61
Main Menu Buttons - Settings
Installation Settings
Fan Off Delay
(0s)
Runs the fan for a short time after Cooling or electric strip heat
turns off to increase system efficiency. (0 - 120 Secs.)
(Continued)
Sensor Settings
Control Sensor
(thermostat )
When a remote sensor is connected to the thermostat, the user
may choose which sensor source is used to measure room temperature.
Wired Sensor Use
(remote)
The wired sensor may be used as follows:
•
Use as an Outdoor sensor
•
Use as a Remote Sensor
•
Use as a Supply Sensor
•
Use as a Return Sensor
Wireless Sensors
(remote)
The wireless sensor may be used as follows:
•
Add New Sensor
•
Remote Sensor
• Thermostat Sensor Only
• Wired Sensor Only
• Average All Wireless Sensors
• Average Wired/Thermostat
• Average Wireless/Thermostat
• Average all available Sensors