Johnson Controls ZFR1810 User Manual

ZFR1800 Series Wireless Field Bus System Technical Bulletin12
ZFR Wireless USB Dongle
The ZFR Wireless USB Dongle allows a computer to connect to a ZFR wireless
Field Bus for commissioning and downloading applications to wirelessly enabled
field controllers. The ZFR Wireless USB Dongle is also used with the ZFR
Checkout Tool for the purpose of analyzing a ZFR wireless mesh. The ZFR
Wireless USB Dongle requires a USB software driver, which is installed
automatically with CCT Release 5.3 or later. No user configuration is required.
WRZ-SST-120 Wireless Sensing System Tool
Use the optional, battery-operated WRZ-SST-120 Wireless Sensing System Tool
with any model WRZ Series Sensor as a site survey tool. Position the
battery-operated WRZ-SST-120 Tool and the WRZ Series test sensor in potential
locations of ZFR1800 system devices to survey your application, test the wireless
signal strength between potential device locations, and adjust ZFR1800 device
locations before installing the devices. Refer to the WRZ-SST-120 Wireless Sensing
System Tool Installation Instructions (Part No. 24-10563-12) for more information
on the tool.

Johnson Controls ZFR1810 Specifications

General

Brand	Johnson Controls
Model	ZFR1810
Category	Industrial Electrical
Language	English