Need help?Do you have a question about the JR SX600 and is the answer not in the manual?
General| Brand | JR |
|---|---|
| Model | SX600 |
| Category | Remote Control |
| Language | English |
Adjusting transmitter trim levers for neutral and low throttle positions.
Changing the direction of servo rotation in relation to stick movement.
Adjusting the amount of servo travel for each channel's direction.
Ensures engine can be shut off immediately by closing throttle.
Guidance on how to effectively use the SX600 manual for optimal understanding.
Highlights key features of the SX600 transmitter and RS600 receiver.
Technical details and performance data for the system components.
Instructions for charging the transmitter and receiver battery packs.
Information on using the SX600 as part of a trainer system.
Identifies and locates all controls on the transmitter faceplate.
Explains channel mapping and the throttle ALT function.
Details components and connections on the rear of the transmitter.
Procedure for adjusting the length of the control sticks.
Using DSC for adjustments without radio transmission.
How to attach a neck strap for balanced carrying.
Essential steps for correctly installing the radio system in a model.
Visual guide for connecting receiver, servos, and battery.
Explanation of the transmitter's input keys and display functions.
How the transmitter indicates low battery voltage.
The standard screen shown when the transmitter is powered on.
Viewing trim values directly via digital trim levers.
Overview of System Mode and Function Mode programming paths.
How the Throttle Cut button overrides throttle trim.
Navigating and using the System Mode for initial setup.
Navigating and using the Function Mode for adjustments.
Resets all programming in a selected model to factory settings.
How to select one of the 10 available model memories.
Setting up Flaperon, V-Tail, or Delta wing mixing.
Inputting a 3-character name for each model.
Changing the direction of servo rotation for each channel.
Setting two different servo travels for flight control surfaces.
Adjusting stick sensitivity in the middle range for smoother control.
Adjusting servo neutral positions without mechanical linkage changes.
Adjusting servo travel range for each direction on each channel.
Template for recording programming settings for each model.
Essential safety guidelines for operating radio control models.
Procedures to perform before each day's flying session.
Information on the warranty period and what it covers.
How to send the system for service or repair.
List of available frequencies for 72MHz operation.
Instructions to change the receiver from positive to negative shift.
To Next Page
