JRC JAN-7201 - Suppressing the Rain and Snow Clutter; Suppressing the Sea Clutter

30
5.5 Suppressing the Rain and Snow Clutter
1 Click on the [Menu] button on the left tool bar.
The menu is displayed.
2 Click on the [Settings] button on the menu.
The [Settings] dialog box appears.
3 Select [Signal Process(Basic)] in the classification pane.
Set a basic processing method of radar signal.
4 Suppress the Rain and Snow Clutter.
Move the [Rain] slider to the right to enhance the effect of rain and snow anti-clutter.
By clicking on the button next to the slider, the mode can be switched between manual (MAN) and
automatic (AUTO).
Note
[RAIN] dial of Keyboard operation unit (Option) is be able to perform the following
adjustment.
• When this dial is turned, the level of rain/snow clutters on the radar image is adjusted.
• When this dial is pressed, the function mode is switched to manual/automatic.
5.6 Suppressing the Sea Clutter
1 Click on the [Menu] button on the left tool bar.
The menu is displayed.
2 Click on the [Settings] button on the menu.
The [Settings] dialog box appears.
3 Select [Signal Process (Basic)] in the classification pane.
Set a basic processing method of radar signal.