4-23
Main menu
Explanation
Default
Sub-menu1
Sub-menu2
Sub-menu3
7> MAINTENANCE
INPUT DATA
Data that is received from the serial port can be
displayed on a screen.
・Display format(ASCII/BINARY) can be selected.
-
DIAGNOSIS
DISPLAY DIAG
Self-diagnosis of ROM, RAM, and serial port can be
performed
-
MONITOR TEST
Self-diagnosis of LCD can be performed.
-
BUZZER TEST
Self-diagnosis of buzzer sound can be performed.
-
ERROR LOG
Up to 40 past alarms can be stored and when the
number of alarms exceeds 40, alarms are deleted
from the oldest one.
ALARM
The current alarm is displayed.
-
ERROR LOG The past alarm is displayed. -
SOFT VERSION -
DISPLAY VER -
APP VER
The software version of the display unit can be
displayed.
-
SERIAL
NUMBER
The serial number of the display unit can be displayed. -
BARCODE
The bar code number of the display unit can be
displayed.
-
TX
Transmission from a transducer can be stopped
【ON, OFF】
ON
8> MASTER RESET
ODO RESET
Reset of total distance (ODO).
After power is On,it is effective only for 1 minute.
DISPLAY RESET
Reset of entire display unit.
RECEIVER RESET
Reset of main unit.
9> DEMO MODE
DEMO TYPE Select the action of demonstration.
【OFF, -5kn, 0kn, 18kn, 36kn, 40kn】
・During execution of demonstration, [S] is displayed in
blinking mode at the bottom of the screen.
OFF
10> SOFT UPDATE
DISPLAY
Display program update. -
To Next Page
Loading...
