JRC JLN-205MK2 - Page 52

4-22
Main menu
Explanation
Default
Sub-menu1
Sub-menu2
Sub-menu3
6> INTERFACE
DATA I/O
DATA IN/OUT １,２,３
Select the output format.
【 NMEA, IEC 】
NMEA
DATA IN/OUT
Select the port to "SEND" or "RECEIVE".
Cannot set DATA IN/OUT1, 2, 3.
・When the port is set for output, output sentence and
output interval can be selected.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
IO1:
SEND
IO2:
SEND
IO3:
RECE-
IVE
BIT RATE
Select the bit rate.
Cannot set DATA IN/OUT1,3
【 4800, 9600, 19200, 38400bps 】
IO1:
9600
IO2:
4800
IO3:
9600
RS-485
Select the output format.
【 NMEA, IEC 】
IEC
SENTENCE
(VERSION)
Select the output sentence and interval.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
-
BIT RATE
Select the bit rate.
【 38400, 57600, 76800, 115200bps 】
115200
CONTACT INPUT
Selectting a contact input port.
【 DIMMER、ACK 】
DIMM
ER
DIAGNOSIS
Outputting alarm histry and setting vlaue.
・Data is output from a data IN/OUT1 port.
-