4-25
3)GPS Navigator
【】Chice
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
1> DISPLAY
LCD
CONTRAST
Adjust the LCD contrast.
【 1(dark)～13(light) 】
7
DIMMER-MAXIMUM-
Adjust the LCD dimmer.
Brightness can be changed by using [DIM] key.
・Enter the hihest value in "MAXIMUM" and lowest
value in "MINIMUM".
【 2(dark)～13(bright) 】
11
DIMMER-TYPCAL- 7
DIMMER-MINIMUM- 3
CLIC SOUND
Turn on/off a key-operation click sound. ON
DISPLAY SELECTION
The display assigned to the [DISP] key is registered
・
Up to six screens can be registered.
DISPLAY1,2,3,4,5,6
Select numerical/ analogue (graphic)/ graph screens.
【 Segmentation1,2,3,4/ Special/ Graphic/ OFF】
Refer
to 3.1
DISPLAY
You can select display contents
【 Refer to next section 】
Refer
to 3.1
(DISPLAY
MODE)
Only the integer section or a decimal section of
some item that is selected on a 1-segmentation
customized screen can be expanded.
【 Normal, Special1, Special2, Auro range 】
Normal
AUTO SCREEN Switch a screen automaticaly. OFF
SOUND
Emits a buzzer sound when the screen is switched.
【 Sound1, Sound2, OFF 】
OFF
TIME
Sets a screen switching time in auto screen function.
【 1 ~10 seconds 】
1
BACK LIGHT
Select a LCD backlight color.
【 White, Orange 】
White
2> PLOT
WAYPOINT MARK
Select a waypoint mark
【 Refer to MARK LIST 】
EVENT MARK
Select a event mark
【 Refer to MARK LIST 】
TRACK PERIOD
Sets a track registering time
【 TIME,DISTANCE,OFF 】
TIME：1s～60min DISTANCE：0.01～99.99NM
OFF
TRACK ERASE
All tracks can be deleted. -
TRACK TO ROUTE
A track can change into a route.
-
TRACK PERIOD
Sets a track registering time
【 TIME,DISTANCE,OFF 】
TIME：1s～60min DISTANCE：0.01～99.99NM
TIME
1min
ROUTE START/END
Performing "TRACK TO ROUTE" function
【 START,END 】
END
To Next Page
Loading...
