4-26
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
3> WPT/ROUTE
WPT LIST Displaying a waypoint list and registering waypoins
-
WPT No
Set the waypoint number. 【 001～999 】
-
MARK
Set the waypoint mark
【 Refer to MARK List 】
COMMENT
Set the comment of waypoint
・Characters are selected from character table and can
be entered.
-
POSITION
Set the waypoint position.
【LAT/LON,OWN SHIP,BRG/DISTANCE】
-
ENTER The waypoint can be registered to waypoint list.
-
MAKE ROUTE/LIST Displaying a route list and creating routes
-
ROUTE No
Set the route number 【01～20】
-
RADIUS
Set the radius of the arrival circle
・The "RADIUS" is used for the radius of arrival or anchor
alarm
-
WIDTH
Set the width of route
・The "WIDTH" is used for the width of XTD alarm
-
GC/RL
Set the distance calculation method
【GC、RL】
・GC：Great-circle sailing is used for long distance sailing
・ RL ： Rhumb line sailing is used for relatively short
distance sailing
-
WPT LIST Select the waypoint of the route from waypoint list
-
ENTER The route can be registered to route list
-
ROUTE START/END Performing navigation
-
LEG CHANGE
You can set whether a waypoint is updated automatically
or manually when own ship arrives the waypoint arrival
circle.
【AUTO,MANUAL】
-
DIRECTION
You can set whether to perform navigation in the order of
waypoints or starting from the final waypoint
【ORDER,REVERSE】
ORDER
SPEED SMOOTHING
When waypoint arrival time is calculated, ship speed is
smoothed
【ON,OFF】
OFF
ROUTE
Performing navigation
【START,END】
END
DELETE WPT Deleting waypoints
-
WPT LIST
Specify the waypoint number to be deleted from the
waypoint list
-
FROM TO
Enter the start and end points, and specify the range to
be deleted
-
ALL DELETE Delete all waypoints
-
DELETE ROUTE Deleting route
-
ROUTE LIST
Specify the range to be deleted on the route list
・Waypoint on the route can be deleted at once
-
FROM TO
Enter the start and end points and specify the range to be
deleted
・Waypoint on the route can be deleted at once
-
ALL DELETE
Delete all routes
・Waypoint on the route can be deleted at once
-
To Next Page
Loading...
