JRC JLN-205MK2 - Page 60

4-30
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
DATA IN/OUT3
Select the output format.
・
When the "ROUTE WPT" is selected, the routes, waypoints
and tracks data can be received from PC.
【 NMEA, IEC JRC, ROUTE WPT】
NMEA
DATA IN/OUT
Select the port to "SEND" or "RECEIVE".
・When the port is set for output, output sentence and
output interval can be selected.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
SEND
SENTENCE
Select the output sentences and interval
NMEA/IEC：【1～9s,OFF】 JRC：【4s,OFF】
Ver2.3
※1
BIT RATE
When the "ROUTE WPT" is selected, the bit rate can be
selected.
【 4800, 9600, 19200, 38400bps 】
4800
RECEIVE
When the "ROUTE WPT" is selected, the routes, waypoints
and tracks data can be received from PC.
－
BIT RATE
Select the bit rate.
・JRC:1200bps fixation
【 4800, 9600, 19200, 38400bps 】
4800
RS-485
Select the output format.
【 NMEA, IEC 】
IEC
VERSION
(SENTENCE)
Select the output sentence and interval.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
NMEA/IEC：【1～9s, OFF】
-
BIT RATE
Select the bit rate.
【 38400, 57600, 76800, 115200bps 】
115200
CONTACT INPUT
Setting a contact input port.
【 DIMMER, ACK 】
ACK
CONTACT OUTPUT
Selectting a contact output port.
【 200pluse/NM, 400pluse/NM, ALARM, OFF 】
OFF
DIAGNOSIS
Outputting alarm histry and setting vlaue.
・Data is output from a data IN/OUT1 port.
【CONFIG OUT, ERROR LOG OUT】
-
※1) Default sentence：ACK,APB,DTM,GGA,RMB,RMC,VTG,ZDA