JRC JLN-205MK2 - Page 59

4-29
Main menu
Explanation Default
Sub-menu1
Sub-menu2
Sub-menu3
9> INTERFACE
DATA I/O
DATA IN/OUT1
Select the output format.
【 NMEA, IEC JRC】
NMEA
DATA IN/OUT
Select the port to "SEND" or "RECEIVE".
・When the port is set for output, output sentence and
output interval can be selected.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
SEND
SENTENCE
Select the output sentences and interval
NMEA/IEC：【1～9s,OFF】 JRC：【4s,OFF】
Ver2.3
※1
BIT RATE
Select the bit rate.
・JRC:1200bps fixation
【 4800, 9600, 19200, 38400bps 】
4800
DATA IN/OUT2
Select the output format.
・When the "ROUTE WPT" is selected, the wapoints,
routes and tracks can be output.
【 NMEA, IEC JRC, ROUTE WPT】
NMEA
DATA I/O
Select the port to "SEND" or "RECEIVE".
・When the port is set for output, output sentence and
output interval can be selected.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
SEND
SENTENCE
Select the output sentences and interval
NMEA/IEC：【1～9s,OFF】 JRC：【4s,OFF】
Ver2.3
※1
VERSION
When the "ROUTE WPT" is selected, the output format can
be selected.
・NMEA version: The routes and waypoints data can be
output for WPL and RTE sentence. The tracks data can not
be output.
・JRC: The routes, waypoints and tracks data can be output
for JRC format.
【 NMAE version 1.5,2.1,2.3,4.0、JRC 】
Ver1.5
BIT E RATE
When the "ROUTE WPT" is selected, the bit rate can be
selected.
【 4800,9600,19200,38400 】
4800
OUTPUT DATA
When the "ROUTE WPT" is selected, the output data can be
selected.
【ALL WAYPOINT, ALL ROUTE,
ALL WAYPOINT + ROUTE, ALL TRACK】
ALL
WAYPOINT
SEND
When the "ROUTE WPT" is selected, the data can be output.
－
BIT RATE
Select the bit rate.
【 4800, 9600, 19200, 38400bps 】
4800