– 88 –
3) Setting of the position of sewing start.
・
Press
on the sewing screen.
The "Sewing data edit screen" is displayed.
* Refer to
"5-3-1. 4) Setting the zigzag width,
stitch baseline and stitch length." p. 78
for the zigzag width, stitch baseline position
and stitch length.
<Sewing screen>
4) Setting the sewing end position.
・
Press
on the sewing data edit
screen "Sewing end position selection
screen" is displayed.
<Sewing data edit screen>
・
When
is pressed, the "Sewing start-
ing position selection screen" is displayed.
<Sewing starting position selection screen>
・
Select the sewing starting position
: Sewing starting position, left
: Sewing starting position, right 1
: Sewing starting position, right 2
: Sewing starting position, optional
・
When
is pressed, the entered value
is conrmed and the screen is returned to the
"Sewing data edit screen".
<Sewing data edit screen>
To Next Page
Loading...
Need help?
General
