– 12 –
7. Setting procedure of the machine head
1) Refer to
"
#
-4. Setting for functions of SC-
910N" p.22
, and call the function setting No. 95.
2) The type of machine head can be selected by
pressing switch
3
( switch
4
).
3) After selecting the type of machine head, by
pressing switch
1
( switch
2
), the step
proceeds to 96 or 94, and the display automati-
cally changes to the contents of the setting cor-
responding with the type of machine head.
(Caution) When the type of machine head is
changed, the contents which have
been changed before return to the
standard set values.
WARNING :
When the machine head other than DDL-9000A is used, the work of items 7, 8 and 9 is not
necessary. The machine head is automatically selected by inserting the machine head connector.
3
4
1
2
To Next Page
Loading...
Need help?
General
