JUKI SC-910N User Manual

– 21 –
ENGLISH
5
Thread trimming prohibition function setting
(Function setting No. 9)
Thread trimming operation at normal stitching
and overlapped stitching can be prohibited by se-
lecting the thread trimming prohibition.
It is possible to change the set value with
switch
3
or switch
4
.
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
Wh en "1" is s el ec ted , t he
thread trimming prohibition dis-
play lights up when the mode
is returned to the normal one.
1 2 3 4
1 2 3 4
1 2 3 4
3
Number of stitches to stop the sewing machine
after detection of material end setting (Function
setting No. 4)
Press / switch
2
to advance to the func-
tion setting No. 4.
It is possible to change the set value with
switch
3
or switch
4
.
Specied number of stitches : 0 to 19 stitches
(Caution)Whenthespeciednumberofstitches
is insufficient, there is a case where
the sewing machine cannot stop within
the specified number of stitches de-
pending on the speed of rotation of the
sewing machine.
4
One-shot automatic stitching setting function
(Function setting No. 119)
Press / switch
2
to advance to the func-
tion setting No. 119.
It is possible to change the set value with
switch
3
or switch
4
.
0 : Pedal designated speed is prior.
1 : Automatic operation
(Caution) It is rendered effective when the mate-
rial end sensor function is set.
It is not possible to prohibit the one-
shot operation at the time of the over-
lapped stitching operation.
Speed of rotation is the speed set at
the function setting No. 38.
When "1" is selected, the one-
shot automatic stitching display
lights up when the mode is re-
turned to the normal one.

JUKI SC-910N Specifications

General

Brand	JUKI
Model	SC-910N
Category	Sewing Machine
Language	English