JUKI SC-910N User Manual

– 23 –
ENGLISH
1 2
1 2 3 4
5
1 2 3 4
SpeciedNo.
4) When you want to advance the setting No., press
/ switch
2
to advance the setting No.
When you want to return the setting No., press
/ switch
1
to return the setting No.
(Caution) Wh en
/
swi tch
1
(
/
switch
2
) is held pressing, the setting
No. will return (will advance) continuously.
When the setting No. is advanced (re-
turned), the contents which are before
by one (after by one) will be deter-
mined. So, be careful when changing
the contents ( up/down switch
is touched).
5) When the change has been completed, press
/ switch
1
or / switch
2
to
specify the changed value.
(Caution) 1. When turning OFF the power before
performing this work, the contents
which have been changed are not
updated.
2. Pre ss
/
sw it ch
1
, and
screen display will change to the
contents of the setting No. which is
before by one.
3. Press
/
switch
2
, and screen
display will change to the contents
of next setting No. After completing
the operation, turn OFF the power
and turn ON the power again to re-
turn to the normal operation.
After completing the operation, turn OFF the power and turn ON the power again to return to the normal
operation.
EXAMPLE) CHANGING THE FLICKER REDUCING
FUNCTION (SETTING No. 5)
Press / switch
2
several times to adjust set
No. to “5”. Press switch
4
three times to change the
set No. to “3” since the current set value is displayed
on LED
5
. (Standard : “0”)
(Caution) Keep pressing switch
4
or
switch
3
, and the setting value can be
changed continuously.
* Simultaneously press switch
3
and switch
4
, and the setting contents of set No. will return to
the initial value.
5

JUKI SC-910N Specifications

General

Brand	JUKI
Model	SC-910N
Category	Sewing Machine
Language	English