JUMO dTRANS p02 - 6 Mounting; 6.1 General; 6.2 Prior to Mounting

14
6 Mounting
6.1 General
Open cover flap The cover flap can be opened with a coin.
The keys for operating the JUMO dTRANS p02 are underneath the cover flap.
For details on the setting options see:
➩
"The level concept", page 32ff.
List of
functions
✱
Affix one of the enclosed lists of functions to the cover flap.
6.2 Prior to mounting
De-pressurize the system before mounting the
JUMO dTRANS p02 pressure transmitter!
The installation site should be readily accessible, as close as pos-
sible to the measurement point, and largely free from vibration. The
permissible ambient temperature limits must be observed (note
possible radiant heat).
The JUMO dTRANS p02 pressure transmitter may be mounted
above or below the pressure tapping.
The measurement arrangements below serve as an example and
can be altered according to the requirements of the measurement
task.