9 Adjustment options
34
9.3 Display level
Sequence
1
The sequence can also be stepped through in the opposite direction
by using the key.
2 Factory setting: measurement in %. On request, freely scalable through setup program
(0—100% as -9999 to +9999). Unit can be set (maximum 5 digits, restricted ASCII
character set).
After switching on the pressure transmitter, the last display that
was selected will be shown at the display level.
Action
1
Function Display
(Example)
Display of pressure with
dimensional unit
Display of pressure value
and sensor temperature
in the units selected
Display of the stored
maximum pressure
Display of the stored
minimum pressure
Display of the sensor
temperature in °C or °F
Display of the output
current in mA
Display of
measurement in %
2
or
scaled with freely
selectable dim. unit
To Next Page
