13 Appendix
58
13.4 Settings
1
Different factory settings are possible in accordance with customers’ specification!
H
Individual settings can be recorded in this table.
Function LCD display Factory
setting
Customer’s
setting
Min. value (peak-reading pointer) P min ––
not adjustable
Max. value (peak-reading pointer) P max ––
not adjustable
Density correction P0 1.000
Dimensional unit P1 bar
or mbar
Measurement start P2 mA 4.00
Measurement end P3 mA 20.00
Damping P4 sec 0.1
Measurement start (blind setting) P5 %
0
1
Measurement span (blind setting) P6 %
100
1
Zero adjustment P7 0.000
Current generator P8 mA 3.85
Output current in fault situation P9 mA 21.50
Key / function locking P10 0
Characteristic P11 Lin
Starting point (EP = Entry Point) P12 % 9.400
Version display P13 01.12
not adjustable
Display unit for temperature P14 °C
To Next Page
