33
7 PC setup program
The PC setup program, which is available as an extra, can be used
to modify all parameters of the transmitter (including the custom lin-
earization) with ease. Through the setup interface, the transmitter
and the PC are linked via the “PC interface”.
Configurable parameters
-TAG number (10 characters)
-analog input (sensor type)
-connection circuit (2-/3-/4-wire circuit)
-external or constant cold junction
-custom linearization
-range limits (start and end)
-output signal current/voltage/frequency rising/falling
-digital filter
-response to probe break/short-circuit
-recalibration/fine calibration
-instrument calibration
-limit value/differential of the limit comparators
-file-info text
Additional benefits of the PC setup program
-manage several settings
-one setting for several transmitters
-print out setting for documentation
-operation can be switched to GMA standard
A
The frequency output will not be operated as long as the
setup interface is activated.
To Next Page
Loading...
