17
4 Functions and operation
Function lk8:
Of course, all parameters can also be set using the PC setup pro-
gram, which is available as an extra.
Fault output
If the parameter C221 is set to the value 3, then the following errors
are monitored:
-probe break
-probe short-circuit (resistance thermometer only)
-overrange
-underrange
-internal error (cold-junction Pt100 defective, ...)
If one of these events occur, the open-collector output 1 is activa-
ted.
v See “Illumination/blink behavior” on page 10.
v Chapter 8 “Connection examples”
To Next Page
Loading...
