3 Operator level (visualization)
34
Activate and display (if required) batch report for plant 3:
Start/stop
batch report
If the batch report is configured for start/stop via barcode reader, then it will
be started and stopped as follows.
Start batch
h Scan bar code for “Batch report for Plant 1 — 3”.
h Start scan.
Stop batch
h Scan bar code for “Batch report for Plant 1 — 3”.
h Stop scan.
Activate batch
texts
If a line in a batch report is configured for bar code activation, the activation
proceeds as follows.
Activate text:
h Scan bar code for “Batch report for Plant 1 — 3”.
Scan text.
If a batch report is stopped, then texts that have been activated by
a bar code will be reset to the standard (default) text in the batch
report that is currently active.
In the completed batch report, the texts will be saved.
To Next Page
Loading...
