JUMO LOGOSCREEN - Page 48

6 Memory manager
48
Close memory
manager
Close the memory manager and reactivate the previous visualization.
Update
CF card
Measurement data that have not yet been saved are written onto the CompactFlash
memory card.
Backup ->
CF card
All measurement data in the memory (also those which have already been fetched) are
written to the CompactFlash memory card.
Config data ->
CF card
The configuration data and the user list (fo password management) are written to the
CompactFlash memory card.
CF card ->
config data
The configuration data are read in from the CompactFlash memory card. This will give
the recorder a new configuration.
Save all +
CF card
update
All current reports will be concluded and written to the CompactFlash memory card,
together with the measurement data that have not yet been saved. The present
counter and integrator states will also be saved.
CF card ->
user list
The user list is read in from the CompactFlash memory card.
CF card -> user list
Save all +
update CF card
CF card -> config data
Config data -> CF card
Back up -> CF card
Update CF card
Close memory manager