Jungheinrich EJC 214 User Manual

4.8.1 Raising the load handler
Requirements
– Prepare the truck for operation, see page 82.
Procedure
Press the “Raise load handler” button (63) until you reach the desired lift height.
NOTICE
Risk of material damage to the hydraulic unit
When you have reached the mechanical stops of the load handler, do not press the
"Raise load handler" button any more. Otherwise the hydraulic unit could suffer
material damage.
Z
The lift/lower speed can be infinitely controlled via the movement of the button
(approx. 8 mm).
Short stroke = slow lift / lower
Long stroke = fast lift / lower
The load handler is raised.
Tiller from above
71
72
63
62
Tiller from below
71
72
63
62
98
04.19 en-GB

Jungheinrich EJC 214 Specifications

General

Brand	Jungheinrich
Model	EJC 214
Category	Forklifts
Language	English