0205.GB
C 2
3 Operating the truck without its own drive system (emergency operation)
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (2) (see Chapter F).
– Remove the right-hand drive panel (3) (see Chapter F).
– Turn the screws (4) anti-clockwise as far as the stop.
The truck can now be moved.
F
When you park the truck, the screws (4) must be turned back clockwise as far as the
stop to restore full braking capability.
3
2
4
0205.GB
C 2
3 Operating the truck without its own drive system (emergency operation)
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (2) (see Chapter F).
– Remove the right-hand drive panel (3) (see Chapter F).
– Turn the screws (4) anti-clockwise as far as the stop.
The truck can now be moved.
F
When you park the truck, the screws (4) must be turned back clockwise as far as the
stop to restore full braking capability.
3
2
4