To Next Page

To Previous Page

0205.GB

E 10

Lifting the outriggers

– Press the “Outrigger lift” button (11).

Lowering the outriggers

– Press the “Outrigger lower” button (12).

Avoid dropping the load abruptly, in order to protect the load and the rack surface.

Transporting 2 pallets on top of each other

Transport one pallet on the outriggers and a second pallet on the load forks.

Position the load forks under the first pallet and raise with button (8). Now position the

outriggers under the second pallet and raise the outriggers with button (11).

To transport the truck the load forks with the load must be lowered as near as possible

to the lower load, however not on top of the lower load.

The heavier pallet should always be transported below for safety reasons.

4.4 Parking the truck securely

Always park the truck securely.

Do not park the truck on an incline.

The load handler must always be fully lowered to the floor.

– Lower the load handler.

– Set the key switch (1) to “0” and remove the key or press “Off” for CANCODE.