Jungheinrich EJD K18 User Manual

0205.GB
E 4
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Inspect the entire truck (especially the wheels and the load handler) for visible signs
of damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (14).
– Insert the key in the key switch (1) and turn it to the right as far as it will go (position
“I”) or for CANCODE (o) enter the activation code.
(see Section 5).
– Test the warning button (13).
The truck is now operational.
o The battery discharge indicator (2) indicates the current battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
1
2
3
14
5
13
0205.GB
E 4
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Inspect the entire truck (especially the wheels and the load handler) for visible signs
of damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (14).
– Insert the key in the key switch (1) and turn it to the right as far as it will go (position
“I”) or for CANCODE (o) enter the activation code.
(see Section 5).
– Test the warning button (13).
The truck is now operational.
o The battery discharge indicator (2) indicates the current battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
1
2
3
14
5
13

Jungheinrich EJD K18 Specifications

General

Brand	Jungheinrich
Model	EJD K18
Category	Forklifts
Language	English