Jungheinrich EJD K18 User Manual

C 3
0205.GB
3.1 Emergency operation with service key 741 (o)
The EJD can be moved manually if the electrical system is damaged. This requires a
connected battery in the truck.
The service key 741 (o) (701 is standard) must be set to position 2 of the keyswitch.
Z
Key 701 for normal truck operation can only be turned to position 1 of the keyswitch.
– The “creep” switch must be pressed and held down.
– The brake is now released and the truck can move.
As soon as the creep switch is released, the brakes are applied to the truck.
C 3
0205.GB
3.1 Emergency operation with service key 741 (o)
The EJD can be moved manually if the electrical system is damaged. This requires a
connected battery in the truck.
The service key 741 (o) (701 is standard) must be set to position 2 of the keyswitch.
Z
Key 701 for normal truck operation can only be turned to position 1 of the keyswitch.
– The “creep” switch must be pressed and held down.
– The brake is now released and the truck can move.
As soon as the creep switch is released, the brakes are applied to the truck.

Jungheinrich EJD K18 Specifications

General

Brand	Jungheinrich
Model	EJD K18
Category	Forklifts
Language	English