Jungheinrich EJD K18 User Manual

0307.GB
F 4
4 EJD K18 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Cold Store = k
Chassis/Super-
structure:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Drive: 2.1 Check transmission for noise and leakage t
2.2 Check transmission oil level t
2.3 Change transmission oil kt
Wheels: 3.1 Check wheels for wear and damage t
3.2 Check the wheel bearings and ensure wheels are
securely fastened
kt
Steering: 4.1 Check the steering play t
Brake system: 5.1 Test operation and settings kt
5.2 Check gas pressure springs recuperate, check also for
leaks and damage
t
5.3 Check the brake lining wear t
5.4 Check brake mechanism, adjust and lubricate if
necessary
kt
Lift
mechanism:
6.1 Check operation, wear and setting t
6.2 Visually inspect rollers, slide pieces and stops kt
6.3 Check forks and fork carriage for wear and damage kt
Hydraulic
System:
7.1 Test operation kt
7.2 Check all connections for leakage and damage kt
7.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
kt
7.4 Check oil level kt
7.5 Replace the hydraulic oil and the filter cartridge kt
7.6 Test pressure relief valves kt
Electrical
System:
8.1 Test operation t
8.2 Make sure wire connections are secure and check for
damage
t
8.3 Check fuse ratings t
8.4 Test operation of switches and trip cams and make sure
they are secure
t
8.5 Check contactors and relays; if necessary replace worn
parts
t
8.6 Test operation of warning devices and safety switches. kt
Electric
Motors:
9.1 Check motor attachment t
0307.GB
F 4
4 EJD K18 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Cold Store = k
Chassis/Super-
structure:
1.1 Check all load bearing components for damage t
1.2 Check screw connections t
Drive: 2.1 Check transmission for noise and leakage t
2.2 Check transmission oil level t
2.3 Change transmission oil kt
Wheels: 3.1 Check wheels for wear and damage t
3.2 Check the wheel bearings and ensure wheels are
securely fastened
kt
Steering: 4.1 Check the steering play t
Brake system: 5.1 Test operation and settings kt
5.2 Check gas pressure springs recuperate, check also for
leaks and damage
t
5.3 Check the brake lining wear t
5.4 Check brake mechanism, adjust and lubricate if
necessary
kt
Lift
mechanism:
6.1 Check operation, wear and setting t
6.2 Visually inspect rollers, slide pieces and stops kt
6.3 Check forks and fork carriage for wear and damage kt
Hydraulic
System:
7.1 Test operation kt
7.2 Check all connections for leakage and damage kt
7.3 Check hydraulic cylinder for leaks and damage and
make sure it is secure
kt
7.4 Check oil level kt
7.5 Replace the hydraulic oil and the filter cartridge kt
7.6 Test pressure relief valves kt
Electrical
System:
8.1 Test operation t
8.2 Make sure wire connections are secure and check for
damage
t
8.3 Check fuse ratings t
8.4 Test operation of switches and trip cams and make sure
they are secure
t
8.5 Check contactors and relays; if necessary replace worn
parts
t
8.6 Test operation of warning devices and safety switches. kt
Electric
Motors:
9.1 Check motor attachment t

Jungheinrich EJD K18 Specifications

General

Brand	Jungheinrich
Model	EJD K18
Category	Forklifts
Language	English