EasyManuals Logo

Jungheinrich EJD K18 User Manual

Jungheinrich EJD K18
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
0205.GB
E 8
Braking
F
The braking pattern of the truck depends largely on the ground conditions. The driver
must take this into account when operating the truck.
)Braking with the Service Brake:
Set the tiller (5) up or down to one of
the brake zones (B).
M
The service brake is the generator
brake. Only when this brake fails to
achieve the necessary brake force is
the mechanical brake applied.
Plugging:
You can set the travel switch (9) to
the opposite direction when traveling.
The truck brakes regeneratively until
it starts to move in the opposite
direction.
Braking with the Coasting Brake:
If the travel switch is set to 0, the truck
automatically brakes regeneratively.
F
In hazardous situations set the tiller to the brake position.
Driving on inclines
M
Loads must always be carried on the end of the truck facing uphill.
Preventing the truck from “rolling downhill”:
With the controller set to zero, the brake automatically engages after a short jerk (the
controller detects the truck is rolling back on the slope). The service brake is released
again via the controller, which is also used to select the speed and the travel direction.
712811
0205.GB
E 8
Braking
F
The braking pattern of the truck depends largely on the ground conditions. The driver
must take this into account when operating the truck.
)Braking with the Service Brake:
Set the tiller (5) up or down to one of
the brake zones (B).
M
The service brake is the generator
brake. Only when this brake fails to
achieve the necessary brake force is
the mechanical brake applied.
Plugging:
You can set the travel switch (9) to
the opposite direction when traveling.
The truck brakes regeneratively until
it starts to move in the opposite
direction.
Braking with the Coasting Brake:
If the travel switch is set to 0, the truck
automatically brakes regeneratively.
F
In hazardous situations set the tiller to the brake position.
Driving on inclines
M
Loads must always be carried on the end of the truck facing uphill.
Preventing the truck from “rolling downhill”:
With the controller set to zero, the brake automatically engages after a short jerk (the
controller detects the truck is rolling back on the slope). The service brake is released
again via the controller, which is also used to select the speed and the travel direction.
712811

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich EJD K18 and is the answer not in the manual?

Jungheinrich EJD K18 Specifications

General IconGeneral
BrandJungheinrich
ModelEJD K18
CategoryForklifts
LanguageEnglish

Related product manuals