Jungheinrich EKS 310 User Manual

0206.GB
E 28
To enable the truck to travel again after an EMERGENCY STOP, carry out the
following:
– Determine the possible cause of the EMERGENCY STOP.
– Press the EMERGENCY STOP switch and turn it again.
– Apply inductive automatic steering.
– Press the travel lever.
F
If the truck now starts, test that it works with manual steering and inductive automatic
steering.
Automatic and manual EMERGENCY STOP
If, after an automatic or manual EMERGENCY STOP and having rectified the
problem, you cannot start the truck again, remove the keyswitch and put it back in.
Now carry out a test run as follows:
Raise and lower the Main Lift and Aux. Lift in accordance with the symbols until the
respective display goes out.
Carry out a test run:
- REF-Test run: Raise Main Lift
- REF-Test run: Lower Main Lift
- REF-Test run: Raise Main Lift
- REF-Test run: Lower Aux. Lift
0206.GB
E 28
To enable the truck to travel again after an EMERGENCY STOP, carry out the
following:
– Determine the possible cause of the EMERGENCY STOP.
– Press the EMERGENCY STOP switch and turn it again.
– Apply inductive automatic steering.
– Press the travel lever.
F
If the truck now starts, test that it works with manual steering and inductive automatic
steering.
Automatic and manual EMERGENCY STOP
If, after an automatic or manual EMERGENCY STOP and having rectified the
problem, you cannot start the truck again, remove the keyswitch and put it back in.
Now carry out a test run as follows:
Raise and lower the Main Lift and Aux. Lift in accordance with the symbols until the
respective display goes out.
Carry out a test run:
- REF-Test run: Raise Main Lift
- REF-Test run: Lower Main Lift
- REF-Test run: Raise Main Lift
- REF-Test run: Lower Aux. Lift

Jungheinrich EKS 310 Specifications

General

Brand	Jungheinrich
Model	EKS 310
Category	Forklifts
Language	English