3.5 EN norms
Noise emission level
– HC 110: 69 dB(A)
*+/- 3 dB(A) depending on the truck's equipment
in accordance with EN 12053 as harmonised with ISO 4871.
Z
The noise emission level is calculated in accordance with standard procedures and
takes into account the noise level when travelling, lifting and when idle. The noise
level is measured at the level of the driver's ear.
Electromagnetic compatibility (EMC)
The manufacturer confirms that the truck adheres to the limits for electromagnetic
emissions and resistance as well as the static electricity discharge test in
accordance with EN 12895 as well as the standardised instructions contained
therein.
Z
No changes to electric or electronic components or their arrangement may be made
without the written agreement of the manufacturer.
WARNING!
Damage to medical equipment due to non-ionising radiation
Electrical equipment on the truck carrier emitting non-ionising radiation (e.g. wireless
data transmission) can affect operators' medical equipment (pacemakers, hearing
aids Etc.) and result in malfunctions. Consult a doctor or the manufacturer of the
medical equipment to clarify whether it can be used near the industrial truck.
3.6 Conditions of use
Ambient temperature
– operating at 5°C to 40°C
Z
Special equipment and authorisation are required if the truck is to be used
continually in conditions of extreme temperature or condensing air humidity
fluctuations.
3.7 Electrical Requirements
The manufacturer certifies compliance with the requirements for the design and
manufacture of electrical equipment, according to EN 1175 "Industrial Truck Safety -
Electrical Requirements", provided the truck is used according to its purpose.
17
04.16 en-GB
To Next Page
Loading...
Need help?
General
