4.2 Lifting and jacking up the truck safely
WARNING!
A truck tipover can cause accidents
In order to raise the truck, use only suitable lifting gear at the points specially
provided for this purpose.
u
Note the weight of the truck on the data plate.
u
Always use a jack with a minimum capacity of 5000 kg kg.
u
Raise the unladen truck on a level surface.
u
When raising the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Raising and jacking up the truck securely
Requirements
– Prepare the truck for maintenance and repairs (see page 56).
Tools and Material Required
– Jack
– Hard wooden blocks
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see page 18.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Remove the jack.
The truck is now securely raised and jacked up.
57
04.16 en-GB
To Next Page
Loading...
Need help?
General
