Jungheinrich HC 110 - 4.8 Lifting, transporting and depositing loads

Manual braking
Procedure
• Pull or push against the direction of
movement.
The truck is braked.
8
Braking with the parking brake
Procedure
• Applying the brake pedal (8).
The truck brakes.
4.8 Lifting, transporting and depositing loads
WARNING!
Unsecured and incorrectly positioned loads can cause accidents.
Before lifting a load unit, the driver must make sure that it has been correctly
palletised and does not exceed the truck’s capacity.
u
Instruct other people to move out of the hazardous area of the truck. Stop working
with the truck if people do not leave the hazardous area.
u
Only carry loads that have been correctly secured and positioned. Use suitable
precautions to prevent parts of the load from tipping over or falling off the truck.
u
Damaged loads must not be transported.
u
Never exceed the maximum loads specified on the load diagram.
u
Never stand underneath a raised load handler.
u
Do not stand on the load handler.
u
Do not lift other people on the load handler.
u
Insert the load handler as far as possible underneath the load.
NOTICE
Adapt a slower speed when stacking and retrieving.
44
04.16 en-GB