4.4 Emergency Disconnect, Travel, Steering, Braking
4.4.1 Emergency Disconnect
CAUTION!
Faulty or non-accessible Emergency Disconnect switches can cause
accidents
A faulty or non-accessible Emergency Disconnect switch can cause accidents. In
dangerous situations the operator cannot bring the truck to a halt in time by applying
the Emergency Disconnect switch.
u
The operation of the Emergency Disconnect switch must not be affected by any
objects placed in its way.
u
Report any defects on the Emergency Disconnect switch immediately to your
supervisor.
u
Mark defective truck and take out of service.
u
Do not return the industrial truck to service until you have identified and rectified
the fault.
Applying the Emergency Disconnect
Procedure
• Press the Emergency Disconnect switch (3)
down.
All electrical functions are deactivated.
Releasing the Emergency Disconnect
Procedure
• Pull the Emergency Disconnect switch (3) up until you can feel the Emergency
Disconnect switch (3) engaging.
All electrical functions are enabled and the truck is operational again (assuming the
truck was operational before the Emergency Disconnect was pressed).
42
04.16 en-GB
To Next Page
Loading...
Need help?
General
