2 Transport
WARNING!
Accidental movement during transport
Improper fastening of the truck and mast during transport can result in serious
accidents.
u
Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be
taken and appropriate safety measures applied.
u
The truck must be securely fastened when transported on a lorry or a trailer.
u
The lorry or trailer must have fastening rings.
u
Use wedges to prevent the truck from moving.
u
Use only fastening belts with sufficient strength.
u
Use non-slip materials to securing the load aids (pallet, wedges, ...) e. g. non-slip
mats.
Securing the industrial truck for transport
Requirements
– Load the truck.
– Park the truck securely, see page 41.
Tools and Material Required
– Lashing straps
Procedure
• Attach the lashing straps (30) to the industrial
truck and the transport vehicle and tension
sufficiently.
The truck can now be transported.
22
04.16 en-GB
To Next Page
Loading...
Need help?
General
