5 Battery removal and installation
WARNING!
Accident risk during battery removal and installation
Due to the battery weight and acid there is a risk of trapping or burning when the
battery is removed and installed.
u
Note the "Safety regulations for handling acid batteries" section in this chapter.
u
Wear safety shoes when removing and installing the battery.
u
Use only batteries with insulated cells and terminal connectors.
u
Park the truck on a level surface to prevent the battery from sliding out.
u
Make sure the battery is located securely in the truck's battery compartment.
Requirements
– Park the truck on a level surface.
– Park the truck securely, see page 41.
– Expose the battery, see page 28.
Procedure
• Undo the terminal screws (35) and pull the battery cable off the terminals.
• Lift out the battery.
The battery is now removed.
Z
Installation is in the reverse order. When reinstalling the battery, note the proper
installation position and make sure the battery is connected correctly.
31
04.16 en-GB
To Next Page
Loading...
