Jungheinrich HC 110 - 4.2 Preparing the truck for operation

4.2 Preparing the truck for operation
8
Switching on the truck
Requirements
– For checks and operations to be performed before starting daily operation, see
page 37.
– On-board charger mains plug (34) disconnected.
Procedure
• Pull out the Emergency Disconnect switch (3).
• Switch on the truck. To do this:
• Insert the key in the key switch (37) and turn it to the right as far it will go.
• Test lifting (39) and lowering (38) by applying the control button.
• Test the brakes (8).
Truck is operational.
3
34
38
39
37
40
04.16 en-GB