CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
u
Always disconnect the battery before starting cleaning work.
u
Carry out all necessary safety measures to prevent sparking before cleaning (e.g.
by short-circuiting).
Working on the electrical system
WARNING!
Accident risk
u
Only suitably trained electricians may operate on the truck's electrical system.
u
Before working on the electrical system, take all precautionary measures to avoid
electric shocks.
u
Always disconnect the battery before starting work.
WARNING!
Electrical current can cause accidents
Make sure the electrical system is voltage-free before starting work on it. Before
starting maintenance on the electrical system:
u
Park the truck securely (see page 41).
u
Press the emergency disconnect switch.
u
Disconnect the battery.
u
Remove any rings or metal bracelets, etc. before working on electrical
components.
CAUTION!
Consumables and used parts are an environmental hazard
Used parts and consumables must be disposed of in accordance with the applicable
environmental-protection regulations. Oil changes should be carried out by the
manufacturer's customer service department, whose staff are specially trained for
this task.
u
Note the safety regulations when handling these materials.
WARNING!
The use of wheels that do not comply with the manufacturer's specifications
can result in accidents
The quality of wheels affects the stability and driving characteristics of the truck.
Uneven wear affects the truck's stability and increases the stopping distance.
u
After replacing wheels, make sure the truck is not skewed.
u
Always replace wheels in pairs, i.e. the left- and right-hand wheels at the same
time.
Z
When replacing wheels fitted at the factory, only use the manufacturer’s original
spare parts. Otherwise the manufacturer's specification will not be adhered to.
50
04.16 en-GB